FreshRoast SR540: Perfect for Beginners

home coffee roasting primers from BCT


We carry several types of roasters, with different batch sizes and mechanisms to suit different needs.

Our Favorite Home Coffee Roaster

For new home roasters, we have long recommended the FreshRoast SR540, a “fluid bed” roaster which is super easy to use. Fluid bed roasters are very similar in design to the familiar hot-air popcorn poppers – minimal mechanical parts, simply a fan and a heating element – the only significant difference is a smaller (and therefore hotter) roasting chamber. See video of FreshRoast SR540 in action.

The SR540’s glass roasting chamber makes it easy to watch as the roast develops, and then stop the roast at exactly the right moment. These popular roasters are economically priced, will roast a modest amount of beans in a speedy 7-20 minutes (including cool time), and are very easy to clean and maintain. Simple, safe, and accessible, the SR540 is ideal for new home coffee roasting enthusiasts.

We offer a wide variety of home roasters – different styles for different preferences. For new coffee roasting hobbyists, we frequently recommend the FreshRoast SR540 because it is easy and very popular

How to use your FRESHROAST SR540 coffee roaster

filling FreshRoast SR540

Here are the basic steps:

  1. Start with four level scoops of green coffee (about 4.5 ounces by weight).
  2. Remove the chaff collector, add the coffee to the roasting chamber and put the chaff collector back on.
  3. The new improved control panel is very easy to use. Simply press the knob on the right, and one of the numbers – FAN, POWER, TIMER – will begin to flash. Turn the knob to increase or decrease that setting, or press the knob again to switch to the next setting. Turning the knob while none of the numbers are flashing will display the Temperature in the chamber (NOTE that this is air temp, not internal bean temp, but it still gives an approximate idea of how far along the roast has come). The same RUN/COOL button begins and ends the roast cycle.
  4. Begin with Fan Speed set to 9 and Power set to 5.  Set the Timer for about 15 minutes. Total roast time should come in between 6 and 15 minutes dependent on settings. You may add time at any point by clicking the knob until Timer is flashing and then turning it clockwise; Fan and Power settings also may be adjusted at any time.
  5. Press the RUN button. Starting the roast with low temperature and high fan speed lowers moisture content and gets the beans moving; this will ensure an even roast. After approximately two minutes turn Power up to 9. As the roast progresses, coffee beans will begin turning over vigorously, especially after first crack. Turn the Fan speed down as needed; slower-moving beans will build heat to roast faster and more evenly.
  6. As coffee beans roast they will begin to brown, double in size and shed chaff, emitting a light audible “first crack.” Begin to pay close attention, watching for your desired roast level. For many coffees, we recommend a roast that ends shortly before second crack – beans will appear medium to medium-dark brown and the surface of the beans will begin to turn from dull/flat to a velvety sheen. This is within the range of “City Roast” to “Full City Plus Roast,” and is a good place to start for most coffees. When you are happy with the roast level, simply hit the COOL button to complete the cycle.
  7. Be aware that roasting goes much faster as you move into the dark end of the spectrum. “Second crack” occurs when internal bean oils and moisture expand from an exothermic reaction, producing a small hole in the bean and emitting a subtle crackling sound; this is the start of a dark roast. Sometimes second crack is very quiet, but if you see shiny oils on the surface of the beans, you are into the second crack – consider turning off the heat at this time, as beans will very rapidly darken beyond this point. If you see smoke coming from the roaster, you are well into the second crack and at a dark roast; definitely hit the COOL button now.
  8. DO NOT SKIP THE COOL CYCLE! This function not only stops the roast from continuing and cools beans enough that they may be handled, but also it is very important to allow the equipment to cool before beginning the next batch.
  9. After the cool cycle shuts off, remove the chaff collector (be careful – it may be still pretty warm), lift out the roast chamber by its handle and dump out the beans.  Let freshly roasted beans sit in a glass or ceramic bowl to allow “set-up” for a day or two, then put them in an air tight container. We like to store the set-up roasted beans in a small canning jar.
  10. The only cleaning necessary is to dump out the chaff from the chaff collector and wipe it out; a small basting brush works perfectly. This model yields about 28 cups per batch.

Follow roasting with a “set-up” rest period

Freshly roasted beans will be at their peak of flavor only after they have “set-up” for about 12-24 hours. This is due to necessary off-gassing of carbon dioxide that balances the acidic tones in the beans. Read our primer about roast styles to learn more.

different coffee roasting styles coffee beans set up

What if roasts are too dark or too light?

Batch size is critical to the roasting process. In all air roasters, smaller batches roast slower and larger batches roast faster. It may seem counter-intuitive, but hot air flows more freely with fewer beans, meaning that less heat builds up in the chamber. If your roasts are too dark decrease your batch size to increase air flow or hit the COOL button earlier. If your roasts are too light increase your batch size to increase trapped hot air, or increase time and heat settings.

We recommend taking notes in a Roasting Journal, so that you can remember exactly what settings work best for each unique bean.

Not sure if you want it lighter or darker? Read our primer about roast styles if you would like to experiment with different roast levels.

More Coffee Roaster Tips:

All roasters are sensitive to your home voltage, so it helps to identify a circuit that will not be used by any other appliances while you are roasting. This also means that roasting times may vary slightly from one batch to the next, so be sure to watch carefully, especially with a new roaster.

Keep in mind that these are home roasters not intended for commercial-scale use. It is very important to let them cool down between batches or you may trigger the thermal protection safety features, which require the roaster to be reset by the manufacturer and may void the warranty.

If you want to stop the roast at any time, just hit the COOL button. It is inadvisable to switch the roaster off, as it will be very hot and it will require a cool cycle before handling. We cannot emphasize it enough – the cool cycle is very important to maintaining the longevity and effectiveness of your FreshRoast SR540.

Never leave any roaster unattended. Think of home coffee roasting as similar to frying bacon – it can and will burn if you walk away from it!


Details & NEW Video Guide to FreshRoast SR540


Want to learn more about Green Coffee before diving in? Follow these links:


Ready to get started with Roasting Coffee?